Warm aluminum flux cored wire can weld almost all white metals, including aluminum, aluminum alloy, aluminum-magnesium alloy and dissimilar welding between the above metals, even for white metals that have been severely corroded or contaminated by oil, and even aluminum that is considered irreparable. All alloys can be repaired.
Key Features
Suitable for all-round welding by primary welding operators, only a small heating device is needed, the weld strength after welding is generally higher than the strength of the base metal itself, and it is enough to know the gas welding...
Instructions for use of low temperature aluminum welding wire Step 1: through physical cleaning, polishing the surface
Step 2: Heat the surface of the base metal at the welding place until the temperature reaches the working temperature of the welding wire 380℃-400℃, so that the welding wire can be melted by the heat conduction of the base metal to form...
When the surface temperature of the material is sufficient, the welding wire can flow and penetrate into the metal capillary well
Step 3: When repairing thinner aluminum, just heat the aluminum base material to a suitable working temperature, and then use the welding wire to friction and fuse to form a weld
Only use a metal brush to melt the welding wire to fill the weld to form a weld
Step 4: Small parts are welded with propane gas, and large parts are heated and welded with industrial gas or induction heating device
Naturally slow cooling after welding
Aluminium
Welding
Size: 1.6 x 500mm
Aluminum core diameter: 1.6mm
Material
Aluminum alloy
Melting point: 420（℃） Scope of
How to Use
Low temperature aluminum welding wire can weld almost all white metals
Storage: Store in a ventilated and dry place, can be stored for a long time
