Warm aluminum flux cored wire can weld almost all white metals, including aluminum, aluminum alloy, aluminum-magnesium alloy and dissimilar welding between the above metals, even for white metals that have been severely corroded or contaminated by oil, and even aluminum that is considered irreparable. All alloys can be repaired. Suitable for all-round welding by primary welding operators, only a small heating device is needed, the weld strength after welding is generally higher than the strength of the base metal itself, and it is enough to know the gas welding operation.
Instructions for use of low temperature aluminum welding wire
Step 1: through physical cleaning, polishing the surface.
Step 2: Heat the surface of the base metal at the welding place until the temperature reaches the working temperature of the welding wire 380℃-400℃, so that the welding wire can be melted by the heat conduction of the base metal to form a weld. When the surface temperature of the material is sufficient, the welding wire can flow and penetrate into the metal capillary well.
Step 3: When repairing thinner aluminum, just heat the aluminum base material to a suitable working temperature, and then use the welding wire to friction and fuse to form a weld. Only use a metal brush to melt the welding wire to fill the weld to form a weld.
Step 4: Small parts are welded with propane gas, and large parts are heated and welded with industrial gas or induction heating device. Naturally slow cooling after welding
Features:
Type: Aluminium Welding Rod
Size: 1.6 x 500mm
Aluminum core diameter: 1.6mm
Material: Aluminum alloy
Melting point: 420(℃)
Scope of application: Low temperature aluminum welding wire can weld almost all white metals
Storage: Store in a ventilated and dry place, can be stored for a long time